Panasonic AFPX-C30R User Manual page 264

8.3.9 FP-X Pulse I/O Cassette
Product No.: AFPX-PLS
Note:
The pulse I/O cassette cannot be used with the FP-X Control Unit Tr type.
High-speed counter part
Item
Insulation method
For high-speed counter
No. of
For Pulse catch
input
For interrupt input
points
For normal input
Rated input voltage
Operating voltage range
Rated input current
Input points per common
Min. on voltage/Min. on current
Max. off voltage/Max. off current
Input impedance
Response time
Operating mode indicator
EN61131-2 Applicable type
Note) This is the specification when the rated input voltage is 24 V DC at 25 °C.
As the input of the pulse I/O cassette is for the counter input, the response time is quick. Therefore,
if it is used as a normal input, it is recommended to add a timer by a ladder program to prevent
chattering or noises to be received as input signals.
Pulse output part
Item
Insulation method
For pulse output
No. of
output For PWM output
points
For normal input
Output type
Rated load voltage
Operating load voltage range
Max. load current
Max. surge current
Output points per common
Off state leakage current
On state voltage drop
Y0
Y1
Response time
Y2
External power supply (+, - terminals)
Surge absorber
Operating mode indicator
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
Optical coupler
Single-phase 2 channels, 2-phase 1 channel
3 points
3 points
3 points
24 V DC
21.6 to 26.4 V DC
Approx. 8 mA
3 points/common
19.2 V DC/6 mA
2.4 V DC/1.3 mA
Approx. 3 kΩ
off→on 5 µs or less
on→off 5 µs or less
LED display
TYPE3 (however, according to the above specifications)
Optical coupler
1 ch
1 ch
3 points
Open collector (NPN)
5 to 24 V DC
4.75 to 26.4 V DC
0.3 A
1.5 A
3 points/common
1µ A or less
0.2 V DC or less
off→on 2 µs or less (when the load current is 15 mA or more.)
on→off 5 µs or less (when the load current is 15 mA or more.)
off→on 1 ms or less
on→off 1 ms or less
21.6 to 26.4 V DC
Zener diode
LED display
Specifications
Note)
Note)
Description