Panasonic AFPX-C30R User Manual page 235

- Connection with GV series via Ethernet
Overview
Connect the FP-X to the GV series via Ethernet. Transmission is performed by sending a response from
the FP-X to the command issued by the GV. The operation with a programmable display can be
performed only by specifying communication settings for each unit without any program for
communication.
Example of connection
- Setting of GV
Use the GV Programmable Operator Terminal CVWIN to specify the Ethernet setting for the GV.
Select [FP series (Ethernet TCP/IP)] in the dialog box of [Select PLC type] when creating a new file, or
select it from [PLC Type Setting] under [System Setting] in the menu bar
Select [Unit Setting] under [System Setting] in the menu bar, and click the [IP Address Setting] tab to set
the IP address of GV.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com