Panasonic AFPX-C30R User Manual page 433

Item
Vibration resistance
Shock resistance
AC
Noise
immunity
DC
Operation condition
Conformed EC
directive
Overvoltage category
Pollution level
Note1) Not isolated between the tool port, USB port, Analog input cassette and Communication cassette
(RS232C part).
Note2) Cutoff current: 5 mA (Factory default setting)
Note3) Excluding between the Analog input cassette, Communication cassette (RS232C part) and
protection earth terminal.
Note4) Excluding between the input terminal and the output terminal of the pulse I/O cassette.
Power supply specifications
AC Power Supply
Item
Rated voltage
Voltage regulation range
Inrush current
(at 240 V AC, 25 °C)
Momentary power off time
Frequency
Leakage current
Internal power supply part
Guaranteed life
Fuse
Insulation system
Terminal screw
Service Power Supply for Input (Output) (Used for AC power supply type only)
Item
Rated output voltage
Voltage regulation range
Rated output current
Overcurrent protection
Note)
function
Terminal screw
Note) This is a function to protect overcurrent temporarily. If a current load that is out of the
specifications is connected, it may lead to damages.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
5 to 9 Hz, single amplitude of 3.5 mm, 1 cycle/min
9 to 150 Hz, constant acceleration of 9.8 m/s
2
Shock of 147 m/s , 4 times on 3 axes
1500 Vp-p with pulse widths 50 ns and 1µs (based on in-house
measurements) (AC power supply terminal)
1000 Vp-p with pulse widths 50 ns and 1µs (based on in-house
measurements) (DC power supply terminal)
Free from corrosive gases and excessive dust
EMC: EN61131-2, LVD: EN61131-2
Category II
Pollution level 2
C14
100 to 240 V AC
85 to 264 V AC
40 A or less
10 ms (when using 100 V AC)
50/60 Hz (47 to 63 Hz)
0.75 mA or less between input and protective earth terminals
20,000 hours (at 55 °C)
Built-in (Cannot be replaced)
Transformer insulation
M3
C14
24 V DC
21.6 to 26.4 V DC
0.15 A
Available
M3
Description
2
, 1 cycle/min, 10 min on 3 axes
Specifications
C30/C60
45 A or less
Specifications
0.4 A
E30
40 A or less
C30/C60/E30