Panasonic AFPX-C30R User Manual page 522

Num-
Name
ber
Integer type data processing instructions
F270 Maximum
P270 value (word
data (16-bit))
F271 Maximum
P271 value (double
word data (32-
bit))
F272 Minimum value
P272 (word data (16-
bit))
F273 Minimum value
P273 (double word
data (32-bit))
F275 Total and
P275 mean values
(word data (16-
bit))
F276 Total and
P276 mean values
(double word
data (32-bit))
F277 Sort (word
P277 data (16-bit))
F278 Sort (double
P278 word data (32-
bit))
F282 Scaling of
P282 16-bit data
F283 Scaling of
P283 32-bit data
F284 Inclination
P284 output of 16-bit
data
Integer type non-linear function instructions
F285 Upper and
P285 lower limit
control
(16-bit data)
: Available, : Not available,
*1) This instruction is only available for FP-e Ver.1.2 or later.
*2) This instruction is only available for FP-X Ver.2.0 or later, and FPΣ Ver. 3.10 or later.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
Ope-
Boolean
rand
S1, Searches the maximum value in the
MAX
S2, D word data table between the "S1" and
PMAX
"S2", an d stores it in the "D". The
address relative to "S1" is stored in
"D+1".
S1, Searches for the maximum value in
DMAX
S2, D the double word data table between
PDMAX
the area selected with "S1" and "S2",
and stores it in the "D". The address
relative to "S1" is stored in "D+2".
S1, Searches for the minimum value in
MIN
S2, D the word data table between the area
PMIN
selected with "S1" and "S2", and
stores it in the "D". The address
relative to "S1" is stored in "D+1".
S1, Searches for the minimum value in
DMIN
S2, D the double word data table between
PDMIN
the area selected with "S1" and "S2",
and stores it in the "D". The address
relative to "S1" is stored in "D+2".
S1, The total value and the mean value of
MEAN
S2, D the word data with sign from the area
PMEAN
selected with "S1" to "S2" are
obtained and stored in the "D".
S1, The total value and the mean value of
DMEAN
S2, D the double word data with sign from
PDMEAN
the area selected with "S1" to "S2"
are obtained and stored in the "D".
S1, The word data with sign from the
SORT
S2, area specified by "S1" to "S2" are
PSORT
S3 sorted in ascending order (the
smallest word is first) or descending
order (the largest word is first).
S1, The double word data with sign from
DSORT
S2, the area specified by "S1" to "S2" are
PDSORT
S3 sorted in ascending order (the
smallest word is first) or descending
order (the largest word is first).
S1, The output value Y is found for the
SCAL
S2, D input value X by performing scaling
PSCAL
for the given data table.
S1, The output value Y is found for the
DSCAL
S2, D input value X by performing scaling
PDSCAL
for the given data table.
S1, Executes the linear output for the
RAMP
S2, specified time from the specified
S3, D initial value to the target value.
S1, When S1>S3, S1→D
LIMT
S2, When S1<S3, S2→D
PLIMT
S3, D When S1<or = S3<or = S2, S3→D
: Not available partially
Description
8
*1
8
*1
8
*1
8
*1
8
*1
8
*1
8
*1
8
*1
8
*1
10
10
*2 *2
10
*1