Panasonic AFPX-C30R User Manual page 66

3.3.2 Parts and Functions
FP-X expansion FP0 adapter (AFPX-EFP0)
○
Status indicator LEDs
1
LED
POWER Green
I/F Green
ERROR Red
○
FP-X expansion bus connector
2
Connects the FP-X control unit (or FP-X expansion unit). The provided expansion cable (AFPX-EC08) is
used for the connection.
It is not necessary to specify the TERM (terminal) setting for the expansion FP0 adapter.
○
Power supply connector (24V DC)
3
Supply the power of 24 V DC. The provided power supply cable (AFP0581) is used for the connection.
Supply the power from the service power supply for the input of the FP-X control unit.
○
FP0 expansion connector
4
Connects the FP0 expansion unit.
○
Expansion hook
5
This hook is used to secure the FP0 expansion unit.
○
DIN rail attachment lever
6
This lever enables the expansion unit to attach to a DIN rail at a touch. The lever is also used for
installation on the mounting plate slim type) (AFP0803).
General specifications
Item
Rated voltage
Voltage regulation
Inrush current
Fuse
Insulation system
Power supply connector
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
When the power of 24 V DC is supplied and the communication starts with the
control unit, the LED lights. When the communication cannot be carried out, it
goes out.
When the communication starts with the control unit, the LED lights. When the
communication cannot be carried out, it goes out.
When the FP0 expansion unit is not connected, it flashes.
When an error occurs on the connection with the FP0 expansion unit, it flashes.
24 V DC
21.6 to 26.4 V DC
20A or less (24 V DC, at 25 °C)
Built-in (Replacement is not available)
Non-isolated
3-pin connector (Power supply cable AFP0581 is provided.)
Specifications