Panasonic AFPX-C30R User Manual page 135

Ethernet and 1-channel RS232C Combination Type (Product No.: AFPX-COM5)
This communication cassette is a 1-channel unit with an Ethernet interface and an isolated three-wire
RS232C port. Ethernet performs communication at 100 Mbps or 10 Mpbs, but communication between
AFPX-COM5 and FP-X is performed at up to 115200 bps according to the system register setting of FP-
X.
LED indication / Terminal layout
Cassette backside switch
Initialization of
communication setting
Normal communication
Computer link
General-purpose serial
communication
PC(PLC) link
MODBUS RTU
Note1) The RS232C of the COM2 port is not available when using the USB port of the FP-X.
Note2) The PC (PLC) link function of the FP-X is available via Ethernet.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
LEDs for Ethernet
LINK/ACT
SPD
ERR
It is used to restore the setting to the factory default
ON
in such a case that an error occurred in
communication. The setting is initialized by turning
OFF
on electricity with the switch being on. After
(Default)
initialization, turn off the power supply of the main
unit, and then turn the switch off.
1:1 communication
Available
Available
Note2)
Available
On: Connection establishment
Flashing: During communication
On: 100 Mbps
Off: 10 Mbps
On: Error occurred
Flashing: Initialization switch ON
1:N communication
Available
Not available
Note2)
Not available
A maximum of 3
connections are available
with the Ethernet
communication in the
computer link mode.