Panasonic AFPX-C30R User Manual page 209

Option setting
Item
Response timeout
(When selecting the
computer link only)
End code
Judgment time without
termination
Information
area first No.
Network
information
Network
notification
informa-
Network
tion
information
confirmation
Connection
information
confirmation
Destination
unit No. and
Target IP
IP address is
address
specified.
for unit
No. Unit No.
IP address
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
Set the wait time for the response.
This is the code for the AFPX-COM5 to confirm the end of the
message (data) to be received from the FP-X.
CR, CR+LF or NONE can be selected.
Reception continues until the end of the message (CR, CR+LF)
will be received. When selecting NONE, the end code is not
confirmed.
Set the wait time for the end code.
If the next message (data) is not received within the judgment
time without termination (ms) after the last received message
(data), the AFPX-COM5 judges that is no termination, and
performs the following operation.
(End code: when selecting CR, CR+LF)
The received message (data) is discarded. For TCP, the
connection is disconnected.
(End code: when selecting NONE)
The message (data) is transmitted to the connected destination.
Set the area of DT to be used for the network information and
connection information.
Setting range: 3000 to 12000
When the power turns on, the network information will be
notified to the FP-X.
When using the computer link and client, the network
information can be confirmed.
When using the computer link and server, the connection
information can be confirmed from the LAN side.
A command is transmitted to the IP address corresponding to
the unit number.
Select a unit number.
Can be selected from the range of 1 to 99.
Set an IP address.
Description Default
5000 ms
CR
20 ms
10000
Invalid
Invalid
Invalid
Invalid
Invalid
192.168.1.100