Toshiba e-STUDIO 2555C Service Manual page 1228

Sub
05/08 Mode Element
element
05 Adjustmen Image Line PRT(color)
t mode Processing density
adjustment
05 Adjustmen Image Line PRT(color)
t mode Processing density
adjustment
05 Adjustmen Image Line PRT(color)
t mode Processing density
adjustment
05 Adjustmen Image Line PRT(color)
t mode Processing density
adjustment
05 Adjustmen Image Line PRT(color)
t mode Processing density
adjustment
05 Adjustmen Image Line PRT(color)
t mode Processing density
adjustment
05 Adjustmen Image Auto
t mode Processing Trapping
setting
05 Adjustmen Image Auto
t mode Processing Trapping
setting
05 Adjustmen Image Pure PRT(color)
t mode Processing Black/Gray
threshold
adjustment
Item Subitem Code
1200dpi 8242
1200dpi 8242
1200dpi 8243
1200dpi 8243
1200dpi 8243
1200dpi 8243
8244
8244
XPS/Text 8249
Sub- Default Acceptable
Details
code value value
0 Gray (K) 3 0-5
1 Color (CMYK) 1 0-5
0 Gray (K) lower limit 1 0-255
value
1 Gray (K) upper limit 200 0-255
value
2 Color (CMYK) lower 1 0-255
limit value
3 Color (CMYK) upper 255 0-255
limit value
0 Trapping width (dot) 3 1-3
1 Trapping density (%) 0 0-3
0 General 8 1-255
169
RAM Contents
SYS The larger the value, the darker the fine line becomes.
* This code is not supported by LL20/25ppm model.
SYS The larger the value, the darker the fine line becomes.
* This code is not supported by LL20/25ppm model.
SYS Specifies the effective density range of 05-8242 from 0
to 255.
* This code is not supported by LL20/25ppm model.
SYS Specifies the effective density range of 05-8242 from 0
to 255.
* This code is not supported by LL20/25ppm model.
SYS Specifies the effective density range of 05-8242 from 0
to 255.
* This code is not supported by LL20/25ppm model.
SYS Specifies the effective density range of 05-8242 from 0
to 255.
* This code is not supported by LL20/25ppm model.
SYS Sets the value of width for Auto Trapping. When the
value increases, the bigger gap is suppressed, but the
overlap part becomes more visible.
1: 1 dot
2: 2 dot
3: 3 dot
* This code is not supported by LL20/25ppm model.
SYS Sets the value of density for Auto Trapping. When the
value increases, the bigger gap is suppressed, but the
overlap part becomes more visible.
0: 100%
1: 75%
2: 50%
3: 25%
* This code is not supported by LL20/25ppm model.
SYS The larger the value, the wider the range of colors to be
replaced with black becomes.
The smaller the value, the narrower the range becomes.
* This code is not supported by LL20/25ppm model.
Proce Servic
dure e UI
4
4
4
4
4
4
4
4
4 Yes