Toshiba e-STUDIO 2555C Service Manual page 1226

Sub
05/08 Mode Element
element
05 Adjustmen Image Stroke PS/PDF automatic
t mode Processing adjustment stroke adjustment
05 Adjustmen Image Stroke PS/PDF automatic
t mode Processing adjustment stroke adjustment
Item Subitem Code
600dpi 8239
600dpi 8239
Sub- Default Acceptable
Details
code value value
0 Default setting 1 0-3
1 Minimum stroke width 1 1-2
when disabled
167
RAM Contents
SYS This code is used to change the width of fine lines in PS
and PDF printing. Automatic stroke adjustment is the
function that prevents the width from changing
according to the position.
This code sets whether automatic stroke adjustment is
enabled or disabled if it is not included in the print data.
If this setting is disabled, there will be an increase in
cases in which the width of fine lines becomes thicker
by 1 dot when they are printed.
0: Disabled
1: Enabled
2: Forcibly disabled (Ignores command in printing data)
3: Forcibly enabled (Ignores command in printing data)
SYS This code is used to change the width of fine lines in PS
and PDF printing. Automatic stroke adjustment is the
function that prevents the width from changing
according to the position.
This code sets the minimum width of fine lines when the
automatic stroke adjustment is disabled. For example, if
automatic stroke adjustment is disabled and the width
of fine lines is set to "0" in the PS command, the width
of the lines becomes 1 dot if the value of this code is
set to "1"; equally, if it is set to "2", the width of the lines
becomes 2 dots.
1: 1 dot
2: 2 dots
Proce Servic
dure e UI
4
4