Siemens SIMATIC FM 353 Manual page 58

Defining Parameters
You can use the mouse to change the size of the window for entering the parame-
ter data and the size of the overview display.
Proceed as follows:
1. Position the mouse pointer on the top border of the window, so that it changes
into an arrow.
2. Press the left mouse button, and drag the pointer downwards by moving the
mouse.
3. Release the mouse button.
4. Position the mouse pointer on the bar with the name of the window.
5. Press the left mouse button, and drag the pointer upwards by moving the
mouse. When you have moved the window to the correct position, release the
mouse button.
When you have configured your project, you can call up the Properties screen in
S7 Configuration by selecting the module and activating the menu command Edit
> Object Properties.
Note
Once you have imported a project from STEP 7 V2.1, you cannot store any pa-
rameter data (data blocks) in this project. You can only read the parameter data in
this project by importing the data from a file, or store the data by exporting the
data to a file.
Suggestion!
1. Create a new project in STEP 7 V3.1.
2. Copy all programs (*.awl) into the new project.
Integrated help
The parameterization user interface has an integrated help system to support you
when you set the parameters of the positioning module. To call up the integrated
help:
S Select the menu command Help > Help Topics... or
S press the F1 key or
S select the symbol
mation about and press the left mouse button.
5-6
and then move to the element or window you want infor-
FM 353 Stepper Drive Positioning Module
6ES7 353-1AH01-8BG0