Siemens SIMATIC FM 353 Manual page 194

Human-machine Interface
Table 8-2 Analysis of the user DB by the user program
OP 07/17
Triggered by Triggered by
User DB,
... ...
DBX...
514.6 = 1 SK "Tipp"
514.0 = 1 SK "Steu"
514.1 = 1 SK "Refpk"
514.2 = 1 SK "SMR"
514.3 = 1 SK "MDI"
514.4 = 1 SK "AutoE"
514.5 = 1 SK "Autom"
35.6 TF "software
limit switch
off"
37.5= 1 TF "Restart
axis"
37.1= 1 TF "Delete
distance to
go"
498.1 = 1 SK "read"
37.0 = 1 SK "active"
498.0 = 1 SK "set"
515.7 = 1 SK "Res"
515.6 = 1 SK "Ack"
SK = Softkey, TF = Text field
1) The relevant code for the operating mode (BA) is to be entered in DBB16 of the user DB.
2) Code = 254 in DBB17 of the user DB
3) User DB, DBB196 = 1, DBB197 from DBW500+1, DBB198 = 1, DBB199 = 1
4) User DB, DBB196 = 1, DBB197 from DBW500+1, DBB198 = 1, DBB199 = 4, DBD200 of DBD502
5) User DB, DBBX499.5 must be acknowledged with DBX515.7; DBX399.6 and DBX399.7 must be acknowl-
edged with DBX515.6
8-18
User program
Function
Transfer data for "Jog" mode and "Jog" mode
to the FM
Transfer data for "Control" mode and "Control"
1)
mode to the FM
Transfer "Reference point approach" mode
the FM
Transfer data for "Incremental relative" mode
and "Incremental relative" mode
1)
Transfer "MDI" mode to the FM
Transfer "Automatic single block" mode
FM
Transfer "Automatic" mode
To change "Disable software limit switch", trans-
fer yes/no to the FM
Transfer "Restart axis" to the FM
Transfer "Delete distance-to-go" to the FM
Read MD No. from the user DB, retrieve its
value from the FM, and enter that value in the
user DB
Transfer "Activate MD" to the FM
Transfer MD No. and its value from the user DB
to the FM
Error acknowledgement "Res" in the FM 353
(diagnostic interrupt)
Error acknowledgement "Ack" in the FM 353
(data error, operator/traversing error)
User
DB,
DBX...
1)
38.0
38.1
1)
to
38.2
1)
to the FM
1)
to the
1)
to the FM
3)
39.3
43.3
4)
39.3
5)
FM 353 Stepper Drive Positioning Module
see PIC...
OP 07 OP 17
− 75
2)
723 761
723
−
722 763
73 77
6ES7 353-1AH01-8BG0