Siemens SIMATIC FM 353 Manual page 5

Standards and approvals
Our products are in compliance with the EU Guideline 89/336/EEC "Electromag-
netic Compatibility" and the harmonized European standards (EN) which it embo-
dies.
The current version of the EC Declaration of Conformity can be found on the
Internet at
http://support.automation.siemens.com/WW/view/de/15257461
Recycling and disposal
For recycling in an environmentally compatible manner and for the disposal of your
old SIMATIC in line with prsent state of technology, please contact your appropri-
ate Siemens contact partner:
http://www.automation.siemens.com/partner
Technical support
If you have any technical question, please do no hesitate to contact our hotline:
Time zone:
Telephone
Fax
Internet
E-mail
Note
The country−specific telephone numbers for technical consultation can be found
on the Internet at:
Questions regarding this Manual
If you have any questions regarding this Documentation (suggestions, corrections),
please send a fax or an e−mail to the following address:
Fax:
E-mail:
Siemens Internet address
For currently updated information on the SIMATIC products, vitsit us on the Inter-
net at:
FM 353 Stepper Drive Positioning Module
6ES7 353-1AH01-8BG0
Europe/Africa
+49 (0) 180 5050 222
+49 (0) 180 5050 223
http://www.siemens.com/automation/support-request
adsupport@siemens.com
http://www.siemens.com/automation/service&support
+49 (0) 9131 98 63 315
docu.motioncontrol@siemens.com
http://www.siemens.de/simatic.
Asia/Australia
+86 1064 719 990
+86 1064 747 474
Preface
America
+1 423 262 2522
+1 423 262 2289
iii