Siemens SIMATIC FM 353 Manual page 2

Safety Information
This Manual contains information which you should carefully observe to ensure your own personal
safety and the prevention of damage to the system. This information is highlighted by a warning
triangle and presented in one of the following ways depending on the degree of risk involved:
Danger
!
indicates that death or severe personal injury damage will result if proper precautions are not taken.
Warning
!
indicates that death or severe personal injury damage can result if proper precautions are not taken.
Caution
!
indicates that minor personal injury can result if proper precautions are not taken.
Caution
without warning sign means that material damage can occur if the appropriate precautions are not taken.
Attention
means that an undesired result or a condition may occur if the appropriate note is not observed.
If more than one level of hazard can occur, the warning note of the correspondingly highest level is used in
all cases. If a warning note with a warning triangle warns of personal injury, an additional warning of
material damage can be included in the same warning note.
Qualified personnel
The unit may only be started up and operated by qualified personnel. Qualified personnel
as referred to in the safety guidelines in this document are those who are authorized to start up, earth
and label units, systems and circuits in accordance with relevant safety standards.
Proper use
Please note the following:
Warning
!
The unit may be used only for the applications described in the catalog or the technical description,
and only in combination with the equipment, components and devices of other manufacturers as far
as this is recommended or permitted by Siemens.
It is assumed that this product be transported, stored and installed as intended and maintained and
operated with care to ensure that the product functions correctly and safely.
Trademarks
All names marked with the copyright notice R are registered trademarks of SIEMENS AG.
Other names in this publication might be trademarks whose use by a third party for his own purposes
may violate the rights of the registered holder.
Copyright Siemens AG. 1996-2007 All rights reserved
The reproduction, transmission or use of this document or its contents is not
permitted without express written authority. Offenders will be liable for
damages. All rights, including rights created by patent grant or registration of
a utility model, are reserved.
Siemens AG
Automation & Drives
90437 Nürnberg
Federal Republic of Germany
Index-2
Siemens Aktiengesellschaft
Exclusion of liability
We have checked that the contents of this publication agree with the hard-
ware and software described herein. Nonetheless, differences might exist
and therefore we cannot guarantee that they are completely identical. The
information given in this publication is reviewed at regular intervals and any
corrections that might be necessary are made in the subsequent printings.
E Siemens AG 1996-2007
Subject to change without prior notice.
FM 353 Stepper Drive Positioning Module
6ES7-353-1AH01-8BG0
6ES7 353-1AH01-8BG0