Siemens SIMATIC FM 353 Manual page 145

Table 6-12 Error list, continued
Error Code (AW-DB, DBW66)
HEX DEC
80C4 32964 −32572
80C5 32965 −32571
80C7 32966 −32570
8522 34082 −31454
8532 34098 −31438
853A 34106 −31430
8544 34116 −31420
8723 34595 −30941
8730 34608 −30928
8732 34610 −30926
873A 34618 −30918
8745 34629 −30907
The errors 80A2 to 80A7, as well as 80Cx are temporary, i.e. it is possible that they are eliminated
without your intervention after a certain time of waiting. Messages in the form 7xxx indicate temporary
communication states.
FM 353 Stepper Drive Positioning Module
6ES7 353-1AH01-8BG0
INT
Communication error; repeat the job.
Distributed I/O not available
Job aborted due to restart (warm restart) or cold restart of DP master
DB too short; the data cannot be read out of the DB (Write request)
DB no. out of user area
DB does not exist (Write request)
Error on the n-th (n > 1) attempt to read a DB following the occurrence
of an error (Write request)
DB too short. The data cannot be written to the DB (Read request).
DB write-protected in the CPU. Data cannot be written to the DB (Read
request).
DB no. out of user area
DB does not exist (Read request)
Error on the n-th attempt (n > 1) to write to a DB following the occur-
rence of an error (Read request)
Programming the Technological Functions
Description Description
6-65