Between Input and Power Circuit Transformer isolated
Isolation
Between Input and Internal
Circuit
Effect of Improper Input Connection
Maximum Permanent Allowed Overload (No
Damage)
Selection of Input Type and Input Range
Calibration or Verification to Maintain Rated
Accuracy
*1 The total input delay time increases in proportion to the number of channels used. Input channels that have been set to unused are not
included in the number of enabled input channels.
*2 The arbitrary setting is a function that uses the digital resolution data by scaling it to arbitrary data (that arbitrarily sets the lower limit value and
the upper limit value). The range setting (-32,768 to 32,767) is specified with data registers.
*3 Input data out of range is reflected in the status of the analog module.
2-68
Voltage
4,096 (12 bits)
Current
4,096 (12 bits)
Thermocouple
Resistance
Thermometer
Thermistor
Resistor
2.44 mV (0 to 10 V)
Voltage
4.88 mV (-10 to +10 V)
4.88 μA (0 to 20 mA)
Current
3.91 μA (4 to 20 mA)
Thermocouple
Resistance
Thermometer
Thermistor
(NTC)
Thermistor
(PTC)
Can be arbitrarily set for each CH in a range between -32,768 to 32,767