iDect FC6A series User Manual page 357

Analog Output Parameter Setting Values
The parameter setting values are as follows.
Signal type
Setting Value
0
1
2
3
4
If the setting value is outside the range, a parameter setting error will occur.
Data type
Setting Value
0
1
If the setting value is 2 to 65,535, a parameter setting error will occur.
Minimum and maximum values
The minimum and maximum values can be set only when the data type is set to optional range. Set the minimum and maximum
values between -32,768 and 32,767.
Unused
0 to 10 V
-10 to +10 V
0 to 20 mA
4 to 20 mA
Binary data
Optional range
FC6A S M S A
ERIES ICRO MART
Signal Type
Data type
- -O T U ' M
LL IN NE YPE SER S ANUAL
9: F
UNCTIONAL
FC9Y-B1722
M
ODULES
9-17