iDect FC6A series User Manual page 305

■ Changing the gateway
Display the CPU Network Settings screen with the same procedure as steps
1.
CPU Network Settings
Setting: Fixed
IP Address
192.168. 1. 6
Select Default Gateway with the
2.
Subnet Mask
255.255.254.0
Default Gateway
0. 0. 0. 0
The range is 000.000.000.000 to 255.255.255.255.
For example, change the default gateway to 192.168.1.3.
Move the cursor with the
3.
Default Gateway
192.168. 1.
Press the (OK) button to change the CPU module's default gateway to 192.168.1.3 and to display the following screen.
4.
Subnet Mask
255.255.254.0
Default Gateway
192.168. 1. 3
Next, to change the setting, IP address, subnet mask, preferred DNS server, and alternate DNS server, see the following pages.
"Changing the setting" on page 7-15, from step
•
"Changing the IP address" on page 7-23, from step
•
"Changing the subnet mask" on page 7-18, from step
•
"Changing the preferred DNS server" on page 7-20, from step
•
"Changing the alternate DNS server" on page 7-21, from step
•
Press the (ESC) button to display the screen in the following diagram.
5.
Select Yes with the
Do you want to
configure network?
No
Yes
(up) and
(left) and (right) buttons and modify the value with the
3
6
2
(down) button and press the
FC6A S M S
ERIES ICRO MART
through
1
(down) buttons and press the
2
2
2
(OK) button.
A - -O T U ' M
LL IN NE YPE SER S ANUAL
7: HMI F
in "Changing the setting" on page 7-15.
5
(OK) button.
(up) and (down) buttons.
FC9Y-B1722
UNCTION
7-19