iDect FC6A series User Manual page 457

Upgrade FC6A Series MicroSmart System Software
The system software of FC6A Series MicroSmart can be upgraded using WindLDR. If the system software of your FC6A Series
MicroSmart is old, upgrade the system software with the following procedure:
Connect the computer to the FC6A Series MicroSmart USB port, Ethernet port 1, or serial port 1.
1.
For details, see the "FC6A Series MicroSmart All-in-One Type Communication Manual".
From the WindLDR menu bar, select Online > Download > System Software Download.
2.
The System Software Download dialog box appears.
Select the PLC type of the CPU module that will perform the download, the target module, and the system software version to
3.
download, and then click Start System Software Download.
(1)
(2)
(3)
(4)
(6)
No. Item Name
(1) PLC Type
(2) Target Module
(3) Version
(4) Revision history
(5)
Select the PLC type of the CPU module.
Select the module that will download the system software from those shown below.
All modules, CPU module, Analog I/O module, PID module, HMI module
All modules is selected by default.
Select the system software version.
If you have selected All modules for Target Module, select from Update all and Custom.
If you have selected a value other than All modules for Target Module, select the version to download to the
selected module.
The revision history related to the system software of the CPU module selected in the System Software Version
Selection dialog box is displayed here.
FC6A S M S
ERIES ICRO MART
Description
A - -O T U ' M
LL IN NE YPE SER S ANUAL
FC9Y-B1722
A
PPENDIX
A-7