iDect FC6A series User Manual page 275

■ D8029: System Software Version
The CPU module system software version number is written to this register.
■ D8030: Communication Adapter Information
This register indicates information about the communication cartridges in Port 2 and Port 3.
The allocation of communication ports in the device (bit assignment) is as follows.
Bit
15
0 (00): No communication cartridges
1 (01): RS-232C communication cartridge
2 (10): RS-485 communication cartridge
3 (11): Free
■ D8031: Optional Cartridge Connection Information
Optional cartridge connection information is written to this register.
The allocation of bits in the device (bit assignment) is as follows.
Bit
15
0: No optional cartridge
1: Has optional cartridge
■ D8032 to D8035, D8214, D8215: Interrupt Input Jump Destination Label No.
Jump destination label numbers for interrupt inputs are written to these registers. When using interrupt inputs, write the label
number that corresponds to the special data register that has been allocated to the interrupt input. For details on interrupt
inputs, see "Interrupt Input" on page 5-33.
D8032 = I1
D8033 = I3
D8034 = I4
D8035 = I6
D8214 = I7
D8215 = I0
■ D8036: Timer Interrupt Jump Destination Label No.
The jump destination label number when the timer interrupt occurs is written to this register. When using the timer interrupt,
store the corresponding label number.
For details on the timer interrupt, see "Timer Interrupt" on page 5-42.
■ D8037: Number of Connected Expansion Modules
The number of expansion modules connected to the CPU module (expansion I/O modules and functional modules) is written to
this register.
■ D8052: J1939 Communication Error Code
When an error occurs in J1939 communication, the error code is written to this register. For details on J1939 communication
error codes, see Chapter 8 "J1939 Communication Error Code (D8052)" in the "FC6A Series MicroSmart All-in-One Type
Communication Manual".
■ D8056: Battery Voltage
The measurement result of the backup battery voltage is written to this register in 1 mV units.
0: Measurement error
■ D8057: Analog Volume (AI0)
The analog volume value is converted to a digital value and written to this register. For details, see "Analog Volume" on page
5-40.
Bit Bit Bit
8 7 3
Bit Bit
8 7 3
FC6A S M S A
ERIES ICRO MART
Bit Bit Bit
2 1 0
Port 2
Port 3
Bit
2 1 0
Reserved=0
SD Memory Card
Cartridge Slot 1
Cartridge Slot 2
Cartridge Slot 3
- -O T U ' M
LL IN NE YPE SER S ANUAL
FC9Y-B1722
6: D
EVICES
6-21