iDect FC6A series User Manual page 162

3: I
NSTALLATION AND
■ Connection Example 1
This example describes the number of connected modules, the internal 5 V line current, and the internal 24 V line current when
the expansion modules, HMI module, and cartridges in the below diagram are connected to the 16-I/O type.
No. Module Type
(1) HMI Module (no installed cartridges)
(2) Communication Cartridge
(3) Output Module
(4) Input Module
(5) Analog Input Module
(6) Analog Input Module
Number of connected modules
•
For the 16-I/O type, the number of modules that can be connected must be four expansion modules (basic expansion side),
one HMI module, and two cartridges or lower. There are four expansion modules (basic expansion side), one HMI module,
and one cartridge, so there is no problem because the maximum number of modules was not exceeded.
Internal 5 V line current
•
The current must be 695 mA or lower. The total current is 415 mA, so there is no problem because it is not exceeded 695 mA.
Internal 24 V line current
•
The current must be 126 mA or lower. The total current is 48 mA, so there is no problem because it is not exceeded 126 mA.
3-32
W
IRING
FC6A
FC6A-PH1
-C16P1CE
(1)
FC6A-PC3
FC6A-PH1
FC6A-PC3
FC6A-T32P3
FC6A-N32B3
FC6A-J4CN1
FC6A-J4A1
FC6A S M S
ERIES ICRO MART
FC6A-T32P3 FC6A-J4CN1
FC6A-N32B3
(2)
(3) (4) (5) (6)
Model Internal 5 V Line Current
415 mA (695 mA or lower)
A - -O T U ' M
LL IN NE YPE SER S
FC6A-J4A1
Internal 24 V Line Current
150 mA
60 mA
45 mA 48 mA (= 1.5 mA × 32 points)
65 mA
50 mA
45 mA
48 mA (126 mA or lower)
FC9Y-B1722
ANUAL
―
―
―
―
―