iDect FC6A series User Manual page 157

Removing the SD Memory Card
Unlock and open the SD memory card cover.
1.
For details, see "Opening the SD Memory Card Cover" on page 3-25.
Push the SD memory card inserted into the FC6A Series MicroSmart until it clicks to unlock it.
2.
Slowly pull out the SD memory card.
3.
Close the SD memory card cover and push it until it clicks.
4.
For details, see "Closing the SD Memory Card Cover" on page 3-26.
The data on the SD memory card may be corrupted by doing the following during access to the SD memory card.
Caution
Turning the FC6A Series MicroSmart power OFF.
•
Removing the SD memory card.
•
Do not turn OFF the FC6A Series MicroSmart power during access to the SD memory card (while the SD card status LED
"SD" is flashing). First confirm that the SD card status LED "SD" is not flashing, then remove the SD memory card from
FC6A Series MicroSmart. For details on the SD card status LED "SD", see "SD Memory Card" on page 11-1.
FC6A S M S A
ERIES ICRO MART
- -O T U ' M
LL IN NE YPE SER S ANUAL
3: I
NSTALLATION AND
FC9Y-B1722
W
IRING
3-27