iDect FC6A series User Manual page 321

Monitoring the FC6A Series MicroSmart Status
You can check the FC6A Series MicroSmart system software version, scan time, protection status, CPU network settings, and HMI
network settings.
On the standard screen, press the
1.
When the user program is running
Running
2015/DEC/01/TUE
13:30:40
The system menu is displayed.
Select Status Monitor with the
2.
When the user program is running
Stop
External Memory
Device Monitor
Status Monitor
The system version is displayed. Press the
3.
When the user program is running
System Version:
1.00
Run/Stop Status:
Running
4. The scan time is displayed. Press the
Scan Time:
Current 2 ms
Maximum 4 ms
Minimum 2 ms
The upload protection status is displayed. Press the
5.
Protection Status:
Read Program:
None
The download protection status is displayed. Press the
6.
Write Program:
None
CPU Network Settings 1 is displayed. Press the
7.
CPU Network Settings
Setting: Fixed
IP Address
192.168. 1. 6
CPU Network Settings 2 is displayed. Press the
8.
CPU Network Settings 2
Subnet Mask
255.255.254. 0
(ESC) + (OK) buttons.
When the user program is stopped
Stopped
2015/DEC/01/TUE
13:30:40
(up) and (down) buttons and press the
When the user program is stopped
External Memory
Configurations
Device Monitor
Status Monitor
(down) button.
When the user program is stopped
System Version:
1.00
Run/Stop Status:
Stopped
(down) button.
(down) button.
(down) button.
FC6A S M S A
ERIES ICRO MART
(down) button.
(down) button.
- -O T U ' M
LL IN NE YPE SER S ANUAL
7: HMI F
(OK) button.
FC9Y-B1722
UNCTION
7-35