7: HMI F
UNCTION
Select Setting with the
6.
CPU Network Settings
Setting: Fixed
IP Address
192.168. 1. 5
With the
(up) and
7.
Setting:
Fixed
Data Register:
DHCP
Notes:
If you specify Data Register, the network settings cannot be configured because they are acquired from the data registers.
•
The current network settings can be checked from the status monitor.
•
8.
Press the
(OK) button to change the CPU module's DHCP setting and to display the CPU Network Settings 1 screen.
CPU Network Settings
Setting: Fixed
IP Address
192.168. 1. 5
Next, to change the IP address, subnet mask, gateway, preferred DNS server, and alternate DNS server, see the following pages.
"Changing the IP address" on page 7-17, from step
•
"Changing the subnet mask" on page 7-18, from step
•
"Changing the gateway" on page 7-25, from step
•
"Changing the preferred DNS server" on page 7-20, from step
•
"Changing the alternate DNS server" on page 7-21, from step
•
Press the
(ESC) button to display the screen in the following diagram. Select Yes with the
9.
(OK) button.
Do you want to
configure network?
No
Yes
7-16
(up) and
(down) buttons and press the
(down) buttons, select ON or OFF.
2
2
2
FC6A S
M
S
A
ERIES
ICRO
MART
LL
(OK) button.
2
2
-
-O
T
U
'
M
IN
NE
YPE
SER
S
ANUAL
(down) button and press the
FC9Y-B1722