iDect FC6A series User Manual page 116

2: P S
RODUCT PECIFICATIONS
HMI Module
The HMI module is connected to the CPU module's communication connector.
You can run and stop the user program, monitor device values, and modify settings using the LCD and operation buttons on the
HMI module. The HMI module also features the maintenance communication function, web server function, and send e-mail
function using Ethernet communication.
For details on the HMI module functions, the menu screen, and the operation methods, see "HMI Function" on page 7-1.
Parts Description
FC6A-PH1
(10) HMI-Ethernet Port
Bottom
(1) Front Cover
This cover prevents the mistaken operation of the operation buttons. Open the front cover when using the operation buttons
and when installing or ejecting the cartridge.
(2) LCD
Displays the menus to control the FC6A Series MicroSmart and display the status and settings for the FC6A Series
MicroSmart.
(3) Cartridge Slot 3
This slot is used for installing an analog cartridge. A communication cartridge cannot be used in Cartridge Slot 3.
(4) Communication Connector
Connects the HMI module and the CPU module.
(5) Operation Buttons
Selects the display menu on the LCD and other functions. There are six buttons:
(ESC), (OK).
(6) LINK LED
This LED is on when a network-compatible device is connected to the HMI-Ethernet port with an Ethernet cable.
(7) ACT LED
This LED flashes when sending or receiving data while the LINK LED is on.
(8) Ground Terminal
The functional ground terminal.
2-88
(1) Front Cover
(2) LCD
(3) Cartridge Slot 3
(9) Dummy Cartridge
FC6A S M S
ERIES ICRO MART
(5) Operation Buttons
(6) LINK LED
(7) ACT LED
(8) Ground Terminal
A - -O T U ' M
LL IN NE YPE SER S ANUAL
(4) Communication
Connector
(Up), (Down), (Left),
FC9Y-B1722
(Right),