iDect FC6A series User Manual page 304

7: HMI F
UNCTION
■ Changing the subnet mask
Display the CPU Network Settings screen with the same procedure as steps
1.
CPU Network Settings
Setting: Fixed
IP Address
192.168. 1. 6
Select Subnet Mask with the
2.
Subnet Mask:
255.255.255. 0
Default Gateway
0. 0. 0. 0
The range is 000.000.000.000 to 255.255.255.255.
For example, change the subnet mask to 255.255.254.0.
Move the cursor with the
3.
Subnet Mask
255.255.254.
Press the (OK) button to change the CPU module's subnet mask to 255.255.254.0 and to display the following screen.
4.
Subnet Mask:
255.255.254. 0
Default Gateway
0. 0. 0. 0
Next, to change the setting, IP address, gateway, preferred DNS server, and alternate DNS server, see the following pages.
"Changing the setting" on page 7-15, from step
•
"Changing the subnet mask" on page 7-18, from step
•
"Changing the gateway" on page 7-25, from step
•
"Changing the preferred DNS server" on page 7-20, from step
•
"Changing the alternate DNS server" on page 7-21, from step
•
Press the (ESC) button to display the screen in the following diagram.
5.
Select Yes with the
Do you want to
configure network?
No
Yes
7-18
(up) and (down) buttons and press the
(left) and (right) buttons and modify the value with the
0
6
2
(down) button and press the
FC6A S M S
ERIES ICRO MART
through
1
2
2
2
(OK) button.
A - -O T U ' M
LL IN NE YPE SER S ANUAL
in "Changing the setting" on page 7-15.
5
(OK) button.
(up) and (down) buttons.
FC9Y-B1722