iDect FC6A series User Manual page 159

Insert the battery holder into its original position, and then press it firmly as far as it will go.
4.
Note: Exercise caution regarding the orientation of the battery holder when you insert it.
Turn on the power and confirm that the battery status LED [BAT] turns off.
5.
If the battery dies, device values are reset to their initial values when the power is turned off. Replace the backup battery
•
Caution
before it dies.
Do not perform this work when the FC6A Series MicroSmart is powered. Otherwise there is a risk of damage.
•
Replace the backup battery within 1 minute. If it takes a long time to replace the battery, the device values will be reset
•
to the initial values.
Side of the Battery Holder
FC6A S M S A
ERIES ICRO MART
Side of the Battery Holder
- -O T U ' M
LL IN NE YPE SER S ANUAL
3: I
NSTALLATION AND
FC9Y-B1722
W
IRING
3-29