iDect FC6A series User Manual page 312

7: HMI F
UNCTION
■ Changing the preferred DNS server
Display the HMI Network Settings screen with the same procedure as steps 1 through 5 in "Changing the setting" on page 7-22.
1.
HMI Network Settings
Setting: Fixed
IP Address
192.168. 11. 6
Select Preferred DNS Server with the
2.
Preferred DNS Server:
0. 0. 0. 0
Alternate DNS Server:
0. 0. 0. 0
The range is 000.000.000.000 to 255.255.255.255.
For example, change the preferred DNS server to 192.168.11.200.
Move the cursor with the
3.
Preferred DNS Server:
192.168. 11.200
Press the (OK) button to change the HMI module's preferred DNS server to 192.168.11.200 and to display the following
4.
screen.
Preferred DNS Server:
192.168. 11.200
Alternate DNS Server:
0. 0. 0. 0
Next, to change the setting, IP address, subnet mask, gateway, and alternate DNS server, see the following pages.
"Changing the setting" on page 7-22, from step
•
"Changing the IP address" on page 7-23, from step
•
"Changing the subnet mask" on page 7-24, from step
•
"Changing the preferred DNS server" on page 7-26, from step
•
"Changing the alternate DNS server" on page 7-27, from step
•
Press the (ESC) button to display the screen in the following diagram.
5.
Select Yes with the
Do you want to
configure network?
No
Yes
7-26
(up) and
(left) and (right) buttons and modify the value with the
6
2
2
(down) button and press the
FC6A S M S
ERIES ICRO MART
(down) buttons and press the
2
2
(OK) button.
A - -O T U ' M
LL IN NE YPE SER S ANUAL
(OK) button.
(up) and (down) buttons.
FC9Y-B1722