iDect FC6A series User Manual page 398

11: SD M C
EMORY ARD
Creating the autoexec.ini File Using WindLDR
This section describes the operation procedure to create an autoexec.ini file using WindLDR.
1. On the Configuration tab, in the SD Card group, click Configuration.
The SD Memory Card Configuration dialog box is displayed.
Select the INI file to specify behavior check box and configure the autoexec.ini file behavior and details.
2.
Enter the file name for the ZLD file to create in File name.
•
If the SD memory card folder structure check box is selected, the fixed folders for the operation are automatically created and the
•
autoexec.ini file is created in the created "PROGRAM" folder.
If Download is selected for Action and the PLC program (*.zld) check box is selected, click Configure and configure the ZLD file details.
•
3. Click OK.
Browse For Folder dialog box is displayed.
Select the location to save the ZLD file, and then click OK.
4.
This concludes creating an autoexec.ini file.
11-30 FC6A S M S A
ERIES ICRO MART LL
- -O T U ' M
IN NE YPE SER S ANUAL
FC9Y-B1722