iDect FC6A series User Manual page 395

Creating the autoexec.ini File
The autoexec.ini file is created according to the file format described in this section. By using WindLDR, the autoexec.ini file can be
created by configuring a dialog box and without needing to be aware of the file format.
Note: To create the autoexec.ini file using Notepad or another text editor, type in the sections, keys, and parameters according to the file format
and save the file as "autoexec.ini".
Autoexec File Format
The autoexec file is made up of the following three sections.
Section
[COMMON_SETTING]
[PROGRAM_DOWNLOAD]
[PROGRAM_UPLOAD]
The keys and parameters are described for each section.
If there is no key or if the specified parameter is not applicable, the default value is used for operation.
■ [COMMON_SETTING] section keys and parameters
Key
loading_direction Specifies the autoexec file action.
■ [PROGRAM_DOWNLOAD] section keys and parameters
Key
Specifies the file name of the ZLD file
src_file that will be downloaded from the SD
memory card.
Specifies the operation status after the
auto_start
download is executed.
Specifies whether or not to clear all
device data including keep data after
the user program download is
executed.
The data that will be cleared is inputs,
outputs, internal relays, shift registers,
clear_data
data registers, timer current values,
and counter current values.
Timer present values, counter preset
values, special internal relays, and
special data registers will not be
cleared.
Specifies whether or not to clear error
clear_error information after the download is
executed.
The section that describes the autoexec.ini file action.
The section that describes the operation when downloading data from the SD memory card.
The section that describes the operation when uploading data to the SD memory card.
Description
Description
FC6A S M S
ERIES ICRO MART
Description
Parameter
none No download or upload is performed.
A download is performed from the SD
download memory card according to the
[PROGRAM_DOWNLOAD] section.
An upload is performed to the SD memory
upload card according to the [PROGRAM_UPLOAD]
section.
Parameter
Specify the name of a ZLD file in the FCDATA01 PROGRAM
folder.
The file name is enclosed in quotation marks (" ").
•
The file name is a maximum of 128 characters.
•
However, when downloading the CPU module system
software, output is turned off regardless of this option's
setting.
true Set to run after the download is executed.
false Set to stop after the download is executed.
Clears all device data including keep data
true
after the download is executed.
Does not clear all device data including keep
false
data after the download is executed.
Clears error information after the download is
true
executed.
Does not clear error information after the
false
download is executed.
A - -O T U ' M
LL IN NE YPE SER S ANUAL
11: SD M
\ \
FC9Y-B1722
C
EMORY ARD
Default Value
none
Default Value
"download.zld"
false
false
false
11-27