iDect FC6A series User Manual page 303

■ Changing the IP address
Display the CPU Network Settings screen with the same procedure as steps
1.
Select IP Address with the
2.
CPU Network Settings
Setting: Fixed
IP Address
192.168. 1. 5
The range is 000.000.000.000 to 255.255.255.255.
For example, change the IP address to 192.168.1.6.
Move the cursor with the
3.
IP Address:
192.168. 1.
4. Press the (OK) button to change the CPU module's IP address to 192.168.1.6 and to display the CPU Network Settings
screen.
CPU Network Settings
Setting: Fixed
IP Address
192.168. 1. 6
Next, to change the setting, subnet mask, gateway, preferred DNS server, and alternate DNS server, see the following pages.
"Changing the setting" on page 7-15, from step
•
"Changing the subnet mask" on page 7-18, from step
•
"Changing the gateway" on page 7-19, from step
•
"Changing the preferred DNS server" on page 7-20, from step
•
"Changing the alternate DNS server" on page 7-21, from step
•
Press the (ESC) button to display the screen in the following diagram.
5.
Select Yes with the
Do you want to
configure network?
No
Yes
(up) and (down) buttons and press the
(left) and (right) buttons and modify the value with the
6
6
2
(down) button and press the
FC6A S M S
ERIES ICRO MART
through
1
2
2
2
(OK) button.
A - -O T U ' M
LL IN NE YPE SER S ANUAL
7: HMI F
in "Changing the setting" on page 7-15.
5
(OK) button.
(up) and (down) buttons.
FC9Y-B1722
UNCTION
7-17