iDect FC6A series User Manual page 149

Rotate the power supply terminals cover until it touches the CPU module to unlock it, and then remove the power supply
2.
terminals.
Notes:
Rotate the power supply terminals cover in the direction of the arrow printed on the side.
•
The power supply terminals move together with the power supply terminals cover when it is rotated.
•
■ Attaching the Power Supply Terminals
With the power supply terminals cover touching the CPU module, slowly push the power supply terminals with the attached
1.
power line straight into their original position.
Push the power supply terminals straight in relation to the CPU module. If you push them in at an angle, there is a risk of
Caution
damage or poor contact.
When the power supply terminals cover is rotated 45° or more from the CPU module, slowly rotate it in the direction of the
2.
arrow until it stops.
The power supply terminals cover and the power supply terminal block are locked.
Notes:
• Rotate the power supply terminals cover in the direction of the arrow printed on the side.
• The power supply terminals move together with the power supply terminals cover when it is rotated.
Push the power supply terminals straight in relation to the CPU module. If you push them in at an angle, there is a risk of
Caution
damage or poor contact.
Power Supply Terminals
Power Supply Terminals
45° or more
FC6A S M S A
ERIES ICRO MART
Power supply terminals cover
touching the CPU module
- -O T U ' M
LL IN NE YPE SER S ANUAL
3: I
NSTALLATION AND
Rotate the power supply
terminals cover until it
touches the CPU module
Rotate until it stops
FC9Y-B1722
W
IRING
3-19