iDect FC6A series User Manual page 455

Option Cables (Sold Separately)
Product Name
Shielded flat I/O cable (0.5 m [1.64 feet])
Shielded flat I/O cable (1 m [3.28 feet])
Shielded flat I/O cable (2 m [6.56 feet])
Shielded flat I/O cable (3 m [9.84 feet])
Non-shielded flat I/O cable (0.5 m [1.64 feet])
Non-shielded flat I/O cable (1 m [3.28 feet])
Non-shielded flat I/O cable (2 m [6.56 feet])
Non-shielded flat I/O cable (3 m [9.84 feet])
External device/O/I communication cable
O/I communication cable
FC6A Series expansion interface module
pluggable terminal block
□
*1 The " " in the I/O terminal type numbers indicates the terminal shape.
T: Touch-down terminal block, S: Captive screw terminal block
*2 Use the FC6A-KC1C for products other than the HG2G-5FT22TF Series.
Options (Sold Separately)
Product Name
35 mm wide DIN rail (length: 1,000 mm)
35 mm wide DIN rail (length: 1,000 mm)
Bracket
20-pin connector
USB maintenance cable
Cable length: 2 m (6.7 feet)
USB-mini B port extension cable
(cable length: 1 m [3.28 feet])
Recommended Products (Sold Separately)
Product Name
Ferrule manufactured by Phoenix Contact (1 cable)
Ferrule manufactured by Phoenix Contact (2 cables)
Ferrule tool manufactured by Phoenix Contact
Screwdriver
Type No.
FC9Z-H050A20
FC9Z-H100A20
FC9Z-H200A20
FC9Z-H300A20
FC9Z-H050B20
FC9Z-H100B20
FC9Z-H200B20
FC9Z-H300B20
FC6A-KC1C
FC6A-KC2C
FC6A-PMSB11PN02
FC6A-PMSC10PN02
FC6A-PMSC11PN02
FC6A-PMSC17PN02
Aluminum, used when mounting a rail
Steel, used when mounting a rail
Used to fix CPU modules, expansion modules, and HMI modules
on a rail
20-pin MIL connector for an expansion module
USB cable used to connect the PC and the PLC
<Connector> A: mini B
USB cable used to extend the USB-mini B port to the panel
surface
FC6A S M S A
ERIES ICRO MART
Shielded, 20-pin straight cable for use with I/O modules
This can be used with IDEC I/O terminals.
The type numbers of the supported I/O terminals are shown below.
□
*1
BX1D- 20A, BX1F-
(16-point relay output)
Non-shielded, 20-pin straight cable for use with I/O modules
This can be used with IDEC I/O terminals.
The type numbers of the supported I/O terminals are shown below.
□
*1
BX1D- 20A , BX1F-
(16-point relay output)
Cable for connecting external devices, IDEC displays (HG4G/3G/2G),
and general-purpose display devices (cable length: 5 m [16.4 feet])
RJ45 connector/loose wires (1 item)
Cable dedicated for connecting IDEC displays (HG4G/3G/2G
length: 5 m [16.4 feet])
RJ45 connector/D-sub 9-pin connector (1 item)
5.08 mm pitch, 11-pin, spring clamp type (2 items)
3.81 mm pitch, 10-pin, spring clamp type (2 items)
3.81 mm pitch, 11-pin, spring clamp type (2 items)
3.81 mm pitch, 17-pin, spring clamp type (2 items)
Function
Function
Ferrule used to wire the terminal block
Ferrule used to wire the terminal block
Ferrule crimping tool
Screwdriver used to wire the terminal block
- -O T U ' M
LL IN NE YPE SER S ANUAL
Function
□
*1
20A, BX7D-BT16A1T
□
*1
20A , BX7D-BT16A1T
Type No.
BAA1000PN10
BAP1000PN10
BNL6PN10
FC4A-PMC20P
HG9Z-XCM42
HG9Z-XCE21
FC9Y-B1722
A
PPENDIX
*2
) (cable
Comments
10 items
10 items
10 items
2 items
1 item
1 item
Reference
3-35
A-5