iDect FC6A series User Manual page 316

7: HMI F
UNCTION
Configuring the Blinking Speed
The blinking speed for messages displayed with the message (MSG) instruction can be configured.
These settings can be configured when the user program is stopped. This cannot be configured while the user program is running.
On the standard screen, press the
1.
Stopped
2015/DEC/01/TUE
13:30:40
The system menu is displayed.
Select Configurations with the
2.
Run
Edit Program
External Memory
Configurations
Select Function with the
3.
Function
Clock
Menu Languages
Backlight
Select Message Settings with the
4.
Communications
Message Settings
Select Blink Settings with the
5.
Scroll Settings
Blink Settings
Select Blinking Speed with the
6.
Blinking Speed:
500 ms
Modify the value with the
7.
Blinking Speed:
1000 ms
Selectable blinking speeds
•
The blinking speeds that can be selected are as follows.
500/600/700/800/900/1000 ms
7-30
(ESC) + (OK) buttons.
(up) and (down) buttons and press the
(up) and (down) buttons and press the
(up) and
(up) and (down) buttons and press the
(up) and (down) buttons and press the
(up) and (down) buttons and press the
FC6A S M S A
ERIES ICRO MART LL
(OK) button.
(down) buttons and press the
(OK) button. For example, change the value to 1,000 ms.
- -O T U ' M
IN NE YPE SER S ANUAL
(OK) button.
(OK) button.
(OK) button.
(OK) button.
FC9Y-B1722