iDect FC6A series User Manual page 396

11: SD M C
EMORY ARD
Key
Specifies whether or not to use the
auto_upload auto upload function when there is no
ZLD file.
Specifies whether or not to keep
keep_output output while the user program is
downloading.
■ [PROGRAM_UPLOAD] section keys and parameters
Key
Specifies the name of the ZLD file that
dst_file will be uploaded to the SD memory
card.
Specify to dynamically generate the file
filename_option
name.
*1 If the CPU module serial number cannot be correctly read, filename_option operates as if none was specified.
Restrictions
The maximum number of characters per line is 512 single-byte characters including line feed codes. All the text on the line will be ignored if
•
there are more than 512 single-byte characters on the line.
Each item must be described as a single line. If a line feed occurs before the end of the line, all characters after the line feed are ignored.
•
Only line feed codes of the format generally supported by Windows (CR+LF) are supported. If any other line feed format is used, the
•
autoexec.ini file will fail to run properly.
Data from a semicolon (;) to the line feed code is ignored. The space after the semicolon can be freely used for comments. However, if the
•
autoexec.ini file is opened in WindLDR and then saved again, comments written after the semicolon will be deleted and the file will only
contain standard comments.
Only strings with single-byte characters can be used.
•
If the same key appears multiple times, only the bottom key is valid.
•
11-28
Description
Description
FC6A S M S A
ERIES ICRO MART LL
Parameter
If the ZLD file specified by src_file does not
exist, an upload is executed instead of a
true
download. The file name of the ZLD file to
upload is specified by src_file.
If the ZLD file specified by src_file does not
false
exist, a download is not executed.
true Keeps output while executing the download.
Does not keep output while executing the
false
download.
Parameter
Specify the name of a ZLD file in the FCDATA01 PROGRAM
folder.
The file name is enclosed in quotation marks (" ").
•
The file name is a maximum of 128 characters.
•
However, when downloading the CPU module system
software, output is turned off regardless of this option's
setting.
The file will be created using the serial
number of the CPU module instead of the
sn dst_file file name.
If the serial number is "12A3456",
"12A3456.zld" is created.
Creates the file using the name specified by
none
dst_file.
- -O T U ' M
IN NE YPE SER S ANUAL
\ \ \
*1
FC9Y-B1722
Default Value
false
false
Default Value
"upload.zld"
none