iDect FC6A series User Manual page 309

Press the (OK) button to change the HMI module's Setting and to display the HMI Network Settings 1 screen.
8.
HMI Network Settings
Setting: Fixed
IP Address
192.168. 1. 10
Next, to change the IP address, subnet mask, gateway, preferred DNS server, and alternate DNS server, see the following pages.
"Changing the IP address" on page 7-23, from step
•
"Changing the subnet mask" on page 7-24, from step
•
"Changing the gateway" on page 7-25, from step
•
"Changing the preferred DNS server" on page 7-26, from step
•
"Changing the alternate DNS server" on page 7-27, from step
•
Press the (ESC) button to display the screen in the following diagram. Select Yes with the
9.
(OK) button.
Do you want to
configure network?
No
Yes
■ Changing the IP address
Display the HMI Network Settings screen with the same procedure as steps
1.
HMI Network Settings
Setting: Fixed
IP Address
192.168. 1. 10
Select IP Address on HMI Network Settings with the the
2.
HMI Network Settings
Setting: Fixed
IP Address
192.168. 1. 10
The range is 000.000.000.000 to 255.255.255.255.
For example, change the IP address to 192.168.11.6.
Move the cursor with the
3.
IP Address
192.168. 11.
Press the (OK) button to change the HMI module's IP address to 192.168.11.6 and to display the following screen.
4.
HMI Network Settings
Setting: Fixed
IP Address
192.168. 11. 6
Next, to change the setting, subnet mask, gateway, preferred DNS server, and alternate DNS server, see the following pages.
"Changing the setting" on page 7-22, from step
•
"Changing the subnet mask" on page 7-24, from step
•
"Changing the gateway" on page 7-25, from step
•
"Changing the preferred DNS server" on page 7-26, from step
•
"Changing the alternate DNS server" on page 7-27, from step
•
Press the (ESC) button to display the screen in the following diagram.
5.
Select Yes with the
Do you want to
configure network?
No
Yes
2
2
(left) and (right) buttons and modify the value with the
6
5
2
(down) button and press the
FC6A S M S
ERIES ICRO MART
2
2
2
through
1
(up) and (down) buttons and press the
2
2
2
(OK) button.
A - -O T U ' M
LL IN NE YPE SER S ANUAL
7: HMI F
(down) button and press the
in "Changing the setting" on page 7-22.
5
(up) and (down) buttons.
FC9Y-B1722
UNCTION
(OK) button.
7-23