iDect FC6A series User Manual page 313

■ Changing the alternate DNS server
Display the HMI Network Settings screen with the same procedure as steps 1 through 5 in "Changing the setting" on page 7-22.
1.
HMI Network Settings
Setting: Fixed
IP Address
192.168. 11. 6
Select Alternate DNS Server with the
2.
Preferred DNS Server:
192.168. 11.200
Alternate DNS Server:
0. 0. 0. 0
The range is 000.000.000.000 to 255.255.255.255.
For example, change the alternate DNS server to 192.168.11.201.
Move the cursor with the
3.
Alternate DNS Server:
192.168. 11.201
Press the (OK) button to change the HMI module's alternate DNS server to 192.168.11.201 and to display the following
4.
screen.
Preferred DNS Server:
192.168. 11.200
Alternate DNS Server:
192.168. 11.201
Next, to change the setting, IP address, subnet mask, gateway, and preferred DNS server, see the following pages.
"Changing the setting" on page 7-22, from step
•
"Changing the IP address" on page 7-23, from step
•
"Changing the subnet mask" on page 7-24, from step
•
"Changing the gateway" on page 7-25, from step 2
•
"Changing the preferred DNS server" on page 7-26, from step
•
Press the (ESC) button to display the screen in the following diagram.
5.
Select Yes with the
Do you want to
configure network?
No
Yes
(up) and
(left) and (right) buttons and modify the value with the
6
2
2
(down) button and press the
FC6A S M S
ERIES ICRO MART
(down) buttons and press the
2
(OK) button.
A - -O T U ' M
LL IN NE YPE SER S ANUAL
7: HMI F
(OK) button.
(up) and (down) buttons.
FC9Y-B1722
UNCTION
7-27