iDect FC6A series User Manual page 400

11: SD M C
EMORY ARD
When Download is selected for Action
The following items are displayed.
(4)
(5)
(6)
(7)
(8)
(9)
(10)
(11)
(4) File name
Specifies the file name of the ZLD file that will be downloaded.
The file name is written to the src_file key in the [PROGRAM_DOWNLOAD] section of the autoexec.ini file.
(5) Enable 1-time upload
Select this check box to enable 1-time uploads to the SD memory card.
The setting is written to the onetime_upload key in the autoexec.ini file.
(6) Automatic start after download
Select this check box to automatically set the run status after the ZLD file is downloaded.
The setting is written to the auto_start key in the autoexec.ini file.
(7) Keep output during download
Select this check box to keep output while the user program is downloading.
The setting is written to the keep_output key in the autoexec.ini file.
(8) Clear device values after download
Select this check box to clear the data after the ZLD file is downloaded.
The setting is written to the clear_data key in the autoexec.ini file.
(9) Clear error after download
Select this check box to clear the error information after the ZLD file is downloaded.
The setting is written to the clear_error key in the autoexec.ini file.
(10) PLC program (*.zld)
Select this check box to create a ZLD file when the autoexec.ini file is created in WindLDR.
Click Configure to display the PLC Program Configuration dialog box. Configure the details of the ZLD file to download
and click OK. For details on the items, see "PLC Program Configuration Dialog Box Parameters" on page 11-37.
(11) File name
Displays the file name of the ZLD file to download that was set with File name (4).
11-32 FC6A S M S A
ERIES ICRO MART LL
- -O T U ' M
IN NE YPE SER S ANUAL
FC9Y-B1722