iDect FC6A series User Manual page 423

Swapping Expansion Modules and Cartridges
This section describes how to change the position of expansion modules and cartridges that have been inserted into the module
configuration area.
Select the expansion module or cartridge to move and drag and drop it onto the destination expansion module or cartridge.
1.
Notes:
When the position of an expansion I/O module is changed, the device addresses are automatically changed. For example, when the position
•
of input module (1) and (2) are changed as shown below, the device addresses I0030 to I0037 for input module (1) are changed to I0050 to
I0057. However, please note that the device addresses in the program are not replaced.
CPU Module
When the positions of an analog module and analog cartridge are changed, the configured parameters are also moved. However, the device
•
addresses in the program are not replaced.
Input Module (1) Input Module (2)
Quantity of Inputs: 8 Quantity of Inputs: 16
(I0030 to I0037) (I0040 to I0057)
Input Module (2) Input Module (1)
Quantity of Inputs: 16 Quantity of Inputs: 8
(I0030 to I0047) (I0050 to I0057)
FC6A S M S
ERIES ICRO MART
12: E
XPANSION
A - -O T U ' M
LL IN NE YPE SER S ANUAL
M C
ODULE AND ARTRIDGE
FC9Y-B1722
S
ETTINGS
12-7