Standards Supported By These Cables; Management Cable Specifications; Table 32: Specifications Of Cables To Connect To Management Devices - Juniper OCX1100 Hardware Manual

Standards Supported by These Cables

Related
Documentation

Management Cable Specifications

Table 32: Specifications of Cables to Connect to Management Devices

Ports
RJ-45 Console ( CON2 ) port
Management ( )
MGMT
Ethernet port (10/100/1000)
Mini-USB Type-B Console
( ) port
CON1
Copyright © 2017, Juniper Networks, Inc.
The cables comply with the following standards:
SFP mechanical standard SFF-843—see
Electrical interface standard SFF-8432—see
SFP+ Multi-Source Alliance (MSA) standards.
Pluggable Transceivers Supported on OCX1100 Switches on page 47
Installing a Transceiver in an OCX1100 Switch
Removing a Transceiver on page 119
Table 32 on page 53 lists the specifications for the cables that connect the console (
and management (
MGMT
Cable Specifications
CAT5e UTP (unshielded
twisted pair) cable
–
–
Chapter 7: Transceiver and Cable Specifications
ftp://ftp.seagate.com/sff/SFF-8431.PDF
ftp://ftp.seagate.com/sff/SFF-8432.PDF
) ports to management devices.
Receptacle
RJ-45
–
–
.
CON
Additional Information
"Connecting a Device to a
Management Console by
Using an RJ-45 Connector" on
page 86
"Connecting a Device to a
Network for Out-of-Band
Management" on page 85
53
.
)