Maintenance Points - Power Off; Check Of General Condition; Check Of Condition Of Belts And Gears - AGFA DRYSTAR AXYS Service Manual

DD+DIS032.07E
3

Maintenance Points - Power off

The maintenance with powered-off machine comprises following tasks:
Task

Check of general Condition

Check of Condition of Belts and Gears

Visual Check of the Cables
Cleaning of the Suction Cups
Cleaning of Electronics Compartment
Cleaning of Power Supply Air Inlet
Check and Cleaning of Drum
Cleaning of Thermal Print Head
Electrical Check
3.1 Check of general Condition
(1) Perform a visual check of
•
•
•
•
(2) Disconnect the power and network cable
(3) Remove the left and right cover to prepare the printer for the next steps
(4) Remove the films in the film trays including white plastic sheet
3.2 Check of Condition of Belts and Gears
(1) Check all belts and gears for visible wear
The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled.
Edition 1, Revision 0
09-2007
Power- and network cables.
Covers
The Output tray
The upper and lower Input tray.
DOCUMENT CONTROL NOTE:
DRYSTAR AXYS
Type 5367
Maintenance
Details: see...
3.1
3.2
3.3
3.4
3.5
3.6
3.7
3.8
3.9
Chapter 9 / 13
Agfa Company Confidential