Software Installation; Sw Update: Loading A Sw Patch - AGFA DRYSTAR AXYS Service Manual

DD+DIS033.07E
4

Software Installation

You want to ...
Upgrade the SW to a higher
basic release
Update the SW with a patch
Install SW on a new, empty
hard drive or.
Re-install the software on a
printer in ERROR - SYSTEM
FAILURE state.
NOTE:
•
A software upgrade is a functional extension. It is usually sold through the Sales
and Services Channels
•
A software update is a corrective modification of the basic software version. It
does not include new functionality. SW Updates (Patches) are available on
MedNet.
4.1

SW Update: Loading a SW Patch

This chapter describes the SW Update with a patch.
NOTE:
For instructions regarding SW upgrade to a higher basic release (e.g. SW Upgrade
from SW Rel. 1.80_C1 to 2.0.0_C1) refer to Chapter 7, Modifications
A SW Update can be performed in two ways:
SW Update via ...
Key-operator menu at the local keypad using the CF card
Service menu in the Printer browser pages using the
network connection
The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled.
Edition 1, Revision 0
10-2007
Example
SW Upgrade from SW Rel.
1.80_C1 to 2.0.0_C1
SW Update from 1.8.0_C1 to
1.8.1_C1
Install SW 1.8.0_C1 on an
empty hard drive
Re-Install SW 1.8.0_C1 on a
printer that does not bootup
anymore.
DOCUMENT CONTROL NOTE:
DRYSTAR AXYS
Type 5367/100
Repair and Service
Tools and Auxiliary Means
Refer to .....
Installation Instructions
which are part of the
software
Refer to .....
4.1.1
4.1.2
Agfa Company Confidential
4.1
4.2
4.3
Chapter 3.2 / 55