AGFA DRYSTAR AXYS Service Manual page 159

DD+DIS033.07E
Part 1: Recording the DICOM data
(1) Change the IP address of the
printer to any free IP address in
the network (e.g.
192.9.200.202)
(2) Give the service PC the former
IP address of the printer (e.g.
192.9.200.201)
(3) Start ADVP
(4) Select 'Basic Grayscale' in the
'Start up configuration' screen.
(5) Select 'Application - Comms
Recorder - Start'
(6) In the following window fill in
- Called (Printer) AE Title (this is
the AE title of the printer),
- 'Called (Host) AE Title',
- ADVP Listen port (usually 104:
this is the port the modality
sends DICOM messages),
- Printer IP address (this is the
IP address of the printer)
- printer listen port (usually
104).
(7) Select okay. Now ADVP is
prepared for recording the
communication between
modality and the printer.
The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled.
Edition 1, Revision 0
10-2007
Figure 53: ADVP as Comms Recorder
DOCUMENT CONTROL NOTE:
DRYSTAR AXYS
Type 5367/100
Repair and Service
Tools and Auxiliary Means
Agfa Company Confidential
Chapter 3.2 / 53