Software Release 1.6.0_C1; Supported Features; Limitations - AGFA DRYSTAR AXYS Service Manual

DD+DIS033.07E
1

Software Release 1.6.0_C1

Type of new Software
Release Date
Printer Serial Numbers
Availability
Prerequisites
NOTE:
On MedNet, GSO Library always the latest available software release can be
downloaded.
1.1

Supported Features

All features as specified:

Printing diagnostic data according to the DICOM standard with a
resolution of 508dpi

Printing on Drystar DT2B, DT2C and DT2 Mammo blue base films

Supported film sizes:
o DT2B / DT2C: 14x17", 14x14", 14x11", 10x12", 8x10"
o DT2 Mammo: 14x11", 10x12", 8x10"
1.2

Limitations

Software 1.6.0_C1 has following limitations:

Only one module/spare part replacement per start-up allowed

Only Microsoft Internet Explorer 5.5 or higher can be used to access the printer
browser pages
The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled.
Edition 1, Revision 3
03-2011
Software Releases and Patches
1st customer release
10/2007
 SN1024
MedNet, GSO Library*
None
DOCUMENT CONTROL NOTE:
DRYSTAR AXYS
Type 5367/100
Repair and Service
Chapter 3.8 / 4
Agfa Company Confidential