Connection To The Printer Browser - AGFA DRYSTAR AXYS Service Manual

DD+DIS033.07E
3.5.4 Connection to the Printer Browser Pages
(1) Connect the Service PC to the
Usage
network
(2) Start the browser (Internet
Explorer ≥ 5)
(3) Enter the IP address of the
printer in the address window.
In case the printer homepage is
not displayed, refer to 3.5.4.1
'Adaptation of the PC IP
address' next page.
As an alternative, if it is not possible
to put the Service PC into the hospital
network:
(1) Use a crossed network UTP
cable to connect the network
interface of the Service PC
directly with the network
interface of the printer.
Note: Many service PCs as of
approx. year 2006 do not
require a crossed network
cable: They autodetect the type
of connection (via hub or point-
to-point connection).
(2) Start the browser (Internet
Explorer ≥ 5)
(3) Enter the IP address of the
printer in the address window.
In case the printer homepage is
not displayed, refer to 3.5.4.1
'Adaptation of the PC IP
address' next page.
The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled.
Edition 1, Revision 0
10-2007
Crossed UTP network cable
DOCUMENT CONTROL NOTE:
DRYSTAR AXYS
Type 5367/100
Repair and Service
Tools and Auxiliary Means
Service PC
Printer
Figure 24
Figure 25
Agfa Company Confidential
536632el.cdr
Printer
536632ek.cdr
Chapter 3.2 / 31