AGFA DRYSTAR AXYS Service Manual page 63

DD+DIS033.07E
5.4.3.2 Sharpness Adjustment
(1) Check the DICOM conformance statement whether the modality sends the images
in page mode or image mode.
(2) Select the required smooth factor at the modality to define the sharpness of the
image. See
(3) When finished, print test images from the modality.
(4) Check the image quality together with the customer
(5) In case the image quality is not satisfying continue as described in the flowchart.
See Figure 15.
The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled.
Edition 1, Revision 1
06-2008
Controls, Connections, and Setup Procedures
Figure 18 .
X X
Interpolation Smooth Factors (DICOM values)
251
299
148 143
199
less sharp
Legend
Limits
Default
251 245 235
299
Useable values
NOTE:
Use Cubic Bell interpolation, when the modality sends the images in Page
Mode (images already composed for the film).
Use Cubic High Res interpolation, when the modality sends the images in
Image Mode (printer composes the different images for the film).
DOCUMENT CONTROL NOTE:
DRYSTAR AXYS
Type 5367/100
245 235
200
Cubic Bell
138
101
Cubic High Res
sharp too sharp
536401XK.CDR
200
Figure 18
Chapter 1 / 27
Agfa Company Confidential