AGFA DRYSTAR AXYS Service Manual page 134

DD+DIS033.07E
As long as a key-operator or service command session via Printer Browser Pages is
active, access to the printer via local keypad is not possible.
The printer will show the message: 'Remote Access active - Local keypad is disabled
during this session'.
Do not work with the key-operator or service command session Printer Browser Pages
at the printer as long as the customer is using the printer.
The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled.
Edition 1, Revision 0
10-2007
6. Enter key-operator command session: Same function
like Key-operator Menu on local keypad.
7. Enter service command session: Same function like
Service Menu on local keypad.
8. Release remote command session: Makes a reset on
the Key-operator / Service command session, to
release the connection, in case the session hangs.
9. Reboot Drystar: Reboots the printer.
10. Reset Calibration data: This menu allows toggling
between default calibration data and the latest
calibration data of Film calibration for upper/lower tray,
Print head profile and CDM calibration
11. Scaling Setup: Menu to define general image
interpolation related settings
12. DICOM profile editor: Different menus to define printer
behavior regarding DICOM communication.
13. LPD profile editor: Different menus to define printer
behavior regarding Postscript communication
14. Network Configuration: Allows special network
settings to adapt to other network devices.
15. Printqueue editor: Provides functions for extended
queue management.
16. Controller logging: Provides functions to view, filter,
adapt and save log files.
17. Licenses: Provides window to enter mammo license
18. Modules: Provides functions to check sensors and
motors of single modules.
Refer to Figure 20
DOCUMENT CONTROL NOTE:
DRYSTAR AXYS
Type 5367/100
Repair and Service
Tools and Auxiliary Means
Agfa Company Confidential
Chapter 3.2 / 28