AGFA DRYSTAR AXYS Service Manual page 452

DD+DIS033.07E
R
RAM
RJ45
Router
RS232 Interface
RS232 cable
Term
S
Service Interface
Service key
SMPTE
SMTP
The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled.
Edition 1, Revision 0
10-2007
Short description
Random Access Memory
Free accessible memory. The RAM-board is used to store
intermediate data.
Recommended Jack 45.
A connector specification used with UTP cables. The
connectors are 8-pole flat connectors.
A device in the network to connect two or more networks. It
routes incoming data packages to the corresponding
network. The network system administrator defines the IP-
address of the router for the printer. Only if the router IP-
address is known by the printer it is possible for the printer to
send information via the network back to devices which are
located in another segment of the network.
Computer interface to convert computer internal parallel data
into serial data and vice versa. The interface is defined via
RS232 (Recommended Standard).
Cable following the RS232 standard (Recommended
Standard) to connect two RS232 interfaces (for example
connection between modem and PC).
Short description
RS232 Interface at the printer.
Service tool.
Used to bridge safety switches to make it possible to control
all the devices despite the device is opened.
Society of Motion Picture and Television Engineers.
The printer is able to print out the black/white test image
named after the SMPTE for test purposes.
Simple Mail Transfer Protocol.
Protocol to send e-mails between computers in the internet.
DOCUMENT CONTROL NOTE:
DRYSTAR AXYS
Type 5367/100
Glossary
Chapter 12 / 10
Agfa Company Confidential