Table of Contents
Advertisement
130 | Drystar 5301, Drystar 5302 | Problem solving
Maintenance messages
This section will inform you what to do when maintenance messages appear.
A maintenance message is displayed whenever a maintenance action is due.
Printing still remains possible.
The Maintenance screen is displayed:
Press the Confirm key to acknowledge the new maintenance condition.
As long as the maintenance action has not been executed, the other printer
screens (except the Key-operator screens) will show a 'M' character blinking in
the upper right corner (e.g. the Operator menu screen):
The table below gives an overview of the maintenance messages that requires
maintenance action.
M-code
3
4
5
For more information, contact your local service organization.
Related Links
Film calibration
2830F EN 20210520 0952
Maintenance message
Replace anti-dust filter
Replace pick-up rollers
Film calibration
on page 63
Action to perform
Call service
Call service
See 'Film calibration'
Advertisement
Table of Contents
