AGFA DRYSTAR AXYS Service Manual page 133

DD+DIS033.07E
3.5.3 Service Engineer Tools
Main Purpose
Username / Password
Sub menus
The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled.
Edition 1, Revision 0
10-2007
Welcome to this
DryStar Axys printer
SERVICE TOOLS
HOME General information
List of errors
Printer Infocounters report
DICOM, LPD and HIPAA report
QA Report Page
Software versions
Remote sessions
Show printer status
Enter key-operator command session
Enter service command session
Release remote command session
Reboot Drystar
Reset Calibration Data
Connectivity tools
Scaling Setup
DICOM profile editor
LPD Profile Editor
Network configuration
Printqueue editor
Licenses
Controller logging
Module repair
Modules
Figure 20
Provides functions for configuration and troubleshooting of
the Controller part of the printer
mega / ******
1. List of errors: Shows list of all HC.... error codes.
Same content like chapter 3.3, appendix, error codes..
2. Infocounters Report: Shows printer infocounter.
3. DICOM, LPD and HIPAA report*: Shows infocounter
of the Controller part of the printer.
4. Software versions*: Shows SW versions of printer and
controller part of the printer.
5. Show printer status: Shows possible warnings or
defects or user messages which are currently
displayed at the local display.
DOCUMENT CONTROL NOTE:
DRYSTAR AXYS
Type 5367/100
Repair and Service
Tools and Auxiliary Means
Agfa Company Confidential
Chapter 3.2 / 27