Acceptance Test - AGFA DRYSTAR AXYS Service Manual
Type 5367/100
Hide thumbs
Also See for DRYSTAR AXYS:
- User manual (168 pages) ,
- Reference manual (137 pages) ,
- Manual (55 pages)
Table of Contents
Advertisement
DD+DIS033.07E
6
Acceptance Test
Purpose of the acceptance test:
Proof of printer reproduction capability of image on the monitor.
(1)
Perform the acceptance test according to national regulations:
• Example for DRYSTAR AXYS Mammo in France:
Acceptance test as defined by Afssaps / EUREF. For preparations refer to
DRYSTAR AXYS Technical Documentation DD+DIS033.07E, Chapter 3.6,
Adjustments and Calibrations.
• Example for Germany: DIN6868 Part 56.
NOTE:
The German DIN6868 Part 56 is similar to the Image Quality Control procedure
based on IEC1223-2-4.
The Image Quality Control procedure based on IEC 1223-2-4 is described in the
Hardcopy Application Manual DD+DIS269.06E.
The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled.
Edition 1, Revision 1
06-2008
Controls, Connections and Setup Procedure
Check according to criteria defined by
National Acceptance Test Procedure
Drystar Axys
DOCUMENT CONTROL NOTE:
DRYSTAR AXYS
Type 5367/100
Console
5367_Reg01_002_e.cdr
Figure 23
Chapter 1 / 32
Agfa Company Confidential
Advertisement
Chapters
Table of Contents
